"Industrial welding fume extractors soldering fumes welding smoke extractors"

Industrial Welding Fume Extractors Air Cleaners
Welding, Arc, MIG, TIG, Plasma Cutting, Brazing and Soldering, etc...
FREE Shipping in the 48 States

Helps you meet the new OSHA standard for exposure to
Chromium VI (AKA Hevalent Chromium or Cr(VI)

Make Sure it is an Original Industrial Pollution Control Device!

Natural Solutions Environmental, Inc. Since 1994, is Proud to be a Leading Supplier of Industrial HEPA Air Cleaners and Air Purifiers! We take great pride in ONLY Selling Brand NEW Units Shipped Direct from Factory! We DO NOT and WILL NOT Sell Lower Cost Used, Blemished, Refurbished, Re-conditioned or Imitation Units which may be sold for a little or a lot less!  Remember the old saying: "You get what you Pay For!" and "If it is to good to be true, it probably is." When it comes to air cleaning in a Industrial setting such as Welding Fumes, Odors and Smoke, don't gamble on Imitations - Bet on the Original Pollution Control Device!

Natural Solutions Environmental, Inc.

ON-LINE - From Natural Solutions Environmental, Inc.

Secured Ordering

Industrial air filters Industrial air cleaners Industrial hepa air

Powerful Welding and Soldering Fume and Smoke Extractors

fume extractors You've done the pollution research and you know the problem all too well: Airborne Chemicals, Vapor Gases as well as Smoke, Particles, etc... These self-contained, stand alone, Brand New, Factory Direct Industrial Welding Fume and Smoke Extractors are the "Solutions to your Pollution"! Their superior filtering ability removes 99.97% of pollutants such as welding smoke and dust down to 0.3 microns with each pass through it's 2" Thick HEPA and adsorb chemical gases, fumes and odors with their LARGE Volume Bed of 40 lbs. of granular activated carbon (compared to competitive units which only have 5 to 15 lbs.) all with their 735 CFM blower motor which delivers aprox. 400/500 CFM Actual Air Flow through unit. Furthermore, these systems are non-electronic, which means: freedom from arcing, snapping, and popping; freedom from ozone being generated into the air, and freedom from expensive and messy maintenance. (One of the most cost effective Fume Extraction units on the market for Welding and Soldering Fumes!)

Smoke and Fume Extractors are used for Welding and Soldering, Arc, MIG, TIG, Plasma Cutting, Brazing, etc...

These fume extractor units provide HEAVY DUTY and SAFE Pure Air Filtration:
NO
Annoying Snapping, Crackling or Popping Sounds;
NO Electrical Arcing;

NO Ion Emission; NO Ozone Emission; NO Expensive or Difficult Maintenance.

These Welding Fume Extractors produce NO OZONE! Ozone is a lung irritant that is emitted from ionic air cleaners and many electronic air cleaners. Even small amounts of ozone are undesirable for allergy and asthma sufferers.

9175W WELDING FUME EXTRACTORS

AllerAir Welding Fume Extractors
9175W welding fume extraction


FREE UPS Shipping is USA!

Welding and Soldering Fume Extractors - Arc, MIG, TIG, Plasma Cutting, Brazing and Soldering - Filter Airborne Chemicals, Vapor Gases, Odors as well as Smoke!

Harmful toxins in the industrial workplace are recognized as a major cause of occupational asthma, chronic absenteeism, headaches and respiratory irritation.

Resulting fumes from welding and soldering can contain complex gaseous compounds and particles capable of causing a variety of serious ailments.

Acute exposure to welding fumes can result eye, nose, and throat irritation, fever, chills, headache, nausea, shortness of breath, muscle pain, and a metallic taste in the mouth. Chronic exposure to welding fumes can result in respiratory effects including coughing, wheezing, and decreased pulmonary function.

We offer an industrial fume extractor air cleaner specifically designed to remove the fumes generated by the welding process where the process takes place. Volume of air is calculated so not to influence on the quality of the welding. A four stage filtration system including a 1" Spark Arrestor  and 2" deep 99.97% HEPA down to 0.3 microns and based with Large 40 lbs of activated carbon to neutralize the chemicals and gases found in welding fumes.

Easy to maneuver with 4 heavy duty, ball-bearing wheels.

CLICK HERE TO SEE THE 9175W IN ACTION (WMV Video)

Why we recommend a 4" diameter arm for the Welding Fume Extractor

Local Exhaust Ventilation (LEV) or Source Capture is a system of capturing the welding fume before it reaches the operator/welder. The effectiveness of the LEV is highly dependant upon its proximity to the source of the fumes, i.e., its position relative to the welders arc.

One of the common types of ventilation systems is high-vacuum low volume systems. High vacuum low-volume systems tend to more portable and less expensive to implement than high-volume systems. They use smaller hoses, and as a consequence the capture distance is generally smaller.

The rule of thumb is in order for LEV to be effective, it must achieve a minimum air velocity of about 100 ft/min at the point of fume capture. Velocities greater than 200 ft/min can interfere with the welders arc.

* The 9175W Industries Portable Welding Fume Extractor is equipped with a 735 CFM blower. With filters installed the delivered air is approximately 400/500 CFM.

Typical Air Flow Rates and Capture Distance for LEV Equipment
Air Flow (Q) ft3/min

Duct/Hose Diameter (in.)

Capture Distance (in.)

Weld Length Before
Repositioning (in.)

High Vacuum. Low Volume

50

1.5 - 2

2-3

4-6 for duct

8-12 with flange

88

1.5 - 2

2-3

4-6 for duct

     

8-12 with flange

110

2

3

4-6 for duct

     

8-12 with flange

160

3

5-6

9-12

High Vacuum. Low Volume

* 500-600

4-6

6-9

12-18

800-1000

6-8

9-12

18-24

AllerAir Welding Fume Extractors
9175-VS-1ARTFLEX welding fume extractors


FREE UPS Shipping is USA!

CLICK HERE TO SEE THE 9175W IN ACTION (WMV Video)

Welding and Soldering Fume Extractors - For stationary applications where it is important to capture and retain airborne chemicals, vapors, odors and smoke from welding or soldering work areas.
  • Cabinet: 20 Gauge, Black Powder Coated Steel Housing
  • Heavy Duty Ball Bearing Wheels for Easy Mobility
  • Dimensions: 16"H x 20"W x 24"D
  • Comes With:
    1. Arm Option 1: Single Articulating Flex Arm 4" X 62" Long w/ 8" Diameter Hooded Inlet (Shown in Photo at Left)
    2. Arm Option 2: Duel Articulating Flex Arm 4" X 62" Long w/ 8" Diameter Hooded Inlet
    3. Arm Option 3: Single Articulating Flex Arm 3" X 62" Long  w/ Beveled Inlet
    4. Arm Option 4: Duel Articulating Flex Arm 3" X 62" Long w/ Beveled Inlet
    5. Arm Option 5: Also available with low cost simple Single or Duel Aluminum Flex Hose
  • Blower Speed:
    1. Variable Speed 735 Blower Motor CFM, Actual Air Flow Through Filters is aprox. 400/500 CFM
  • Filters:
    1. Dust Box Collector with convenient removable tray for easy cleaning.
    2. 2" Large Particle Pre-Filter
    3. 1" Spark Arrestor (Metal Frame) - To capture welding sparks and protect filters.
    4. 2" Deep HEPA Filter 99.97% effective down to 0.3 microns.
    5. Bed of 40 lbs. Activated Carbon Canister
  • Weight: 130 to 170 lbs. (Depends upon Arm Selection)
  • Power: Standard 120 VAC/60hz  - Fuse Protected
  • (Available in 110v/60hz and 220v/50hz)
  • FREE Shipping in the 48 States!
industrial welding fume extractor industrial soldering fume extractor
Please Note: ALL Allerair 9175W Welding Fume Extractor Units from Natural Solutions Environmental, Inc. are Factory BRAND NEW! We DO NOT Sell Lower Cost or Discounted Used, Blemished, Refurbished, Re-conditioned or Imitation Units. Our units come Brand NEW Directly from the Factory with the 5 Year Motor Warranty and ALL units come complete with Filters!

Industrial Welding Fume Extractors Air Cleaner Prices

7-10 Day Delivery Schedule

Fume Extractor 9175W

ARM OPTION 1: With 1 - 4" X 62" Long 8" Dia. Hooded

ARM OPTION 2: With 2 - 4" X 62" Long 8" Dia. Hooded

9175W-VS-1ARTFLEXA w/ 735 cfm: $3,420.00
With 1 Articulating Flex Arm - 8" Hooded
FREE Ground Shipping 48 States

Choose AC Service:
Qnty: View Cart or Check Out

9175W-VS-2ARTFLEXA w/ 735 cfm: $4,315.00
Comes with 2 Articulating Flex Arm - 8"Hooded
FREE Ground Shipping 48 States

Choose AC Service:
Qnty: View Cart or Check Out

ARM OPTION 3: With 1 - 3" X 62" Long Beveled

ARM OPTION 4: With 2 - 3" X 62" Long Beveled

9175W-VS-1ARTFLEXB w/ 735 cfm: $3,120.00
With 1 Articulating Flex Arm - Beveled
FREE Ground Shipping 48 States

Choose AC Service:
Qnty: View Cart or Check Out

9175W-VS-2ARTFLEXB w/ 735 cfm: $3,715.00
Comes with 2 Articulating Flex Arm - Beveled
FREE Ground Shipping 48 States

Choose AC Service:
Qnty: View Cart or Check Out

ARM OPTION 5: With 1 - 5" X 96" Long
Simple Aluminum Flex Hose

ARM OPTION 5: With 2 - 4" X 96" Long
Simple Aluminum Flex Hose

9175W-VS-1ALUFLEXA w/ 735 cfm: $2,520.00
With 1 Simple Aluminum Flex Hose
FREE Ground Shipping 48 States

Choose AC Service:
Qnty: View Cart or Check Out

9175W-VS-2ALUFLEXA w/ 735 cfm: $2,615.00
Comes with 2 Simple Aluminum Flex Hose
FREE Ground Shipping 48 States

Choose AC Service:
Qnty: View Cart or Check Out


9175W Fume Extractor Replacement Filter Pack:
9175W Replacement Set
Includes: 12 Pre-Filters, 1- 2" Thick HEPA and 40 lb Carbon Filter
FREE Ground Shipping on this Kit Purchase


Qnty: $999.00
View Cart or Check Out

FREE UPS Shipping is USA! View Cart or Check Out

Click Here For Natural Solutions Product Menu

(or Click on Product Below)


Copyright © Air Cleaners Air Purifiers Conditioners Dehumidifiers and more. 1997,1998,1999  Natural Solutions Environmental, Inc. Online Internet Shopping Mall

industrial welding fume extractors osha  welding smoke soldering

OCCUPATIONAL SAFETY AND HEALTH GUIDELINE FOR WELDING FUMES

Hazard Alert Welding Fumes and Gases