• In stage 1, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stage 2, water travel throughFLUORIDE Removal resin. Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 2700 ppm Fluoride (Avg. 600 to 900 Gallons). (if present in the water) As high as 6600 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed. (if present in the water)
• In stage 4, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.
• In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.  
• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

CQE-CT-00144 CQE-CT-00137
Dimensions: 5"L x 13"H x 5"W
Recommended flow rate: below 0.5 GPM

• In stage 1, water travel through aFLUORIDE Removal Cartridge . Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 4500 ppm Fluoride (Avg. 1000 to 1500 Gallons) .* As high as 11000 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed.*

• Multi Stage Cartridge:

• In stage 2 and 7, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 3 and 4, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction(Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 5, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

• Sits on the counter and easily connects to any kitchen faucet.

• A diverter valve switches between filtered and unfiltered water.

CQE-CT-00132 CQE-CT-00135
Dimensions: 10"L x 13"H x 5"W
Recommended flow rate: below 0.5 GPM

• In stage 1, water travels through a 5 Micron Carbon Block Cartridge for removing volatile organic carbon compounds (VOC's, insecticides, pesticides and industrial solvents).

• In stage 2, water travel through a FLUORIDE Removal Cartridge cartridge. Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 4500 ppm Fluoride (Avg. 1000 to 1500 Gallons) .* As high as 11000 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed.*

• Multi Stage Cartridge:

• In stage 3 and 8, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 4 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 6, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 7, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

• Sits on the counter and easily connects to any kitchen faucet.

• A diverter valve switches between filtered and unfiltered water.

CQE-CT-00133 CQE-CT-00136
Dimensions: 15"L x 13"H x 5"W
Recommended flow rate: below 0.5 GPM

Optional Refrigerator / Ice maker hook up

CQE-US-00315
Dimensions: 5"L x 5"W x 16"H (10" +4" to Change Filter) -  Weight: 10 lbs

• In stage 1, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stage 2, water travel throughFLUORIDE Removal resin. Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 2700 ppm Fluoride (Avg. 600 to 900 Gallons). (if present in the water) As high as 6600 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed. (if present in the water)
• In stage 4, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.
• In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.
• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

Optional Refrigerator / Ice maker hook up

CQE-US-00316
Dimensions: 5"L x 10"W x 16"H (10" +4" to Change Filter) -  Weight: 13 lbs

• In stage 1, water travel through aFLUORIDE Removal Cartridge . Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 4500 ppm Fluoride (Avg. 1000 to 1500 Gallons) .* As high as 11000 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed.*

• Multi Stage Cartridge:

• In stage 2 and 7, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 3 and 4, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction(Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 5, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

Optional Refrigerator / Ice maker hook up

CQE-US-00317
Dimensions: 5"L x 15"W x 16"H (10" +4" to Change Filter) -  Weight: 16 lbs

• In stage 1, water travels through a 5 Micron Carbon Block Cartridge for removing volatile organic carbon compounds (VOC's, insecticides, pesticides and industrial solvents).

• In stage 2, water travel through aFLUORIDE Removal Cartridge cartridge. Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 4500 ppm Fluoride (Avg. 1000 to 1500 Gallons) .* As high as 11000 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed.*

• Multi Stage Cartridge:

• In stage 3 and 8, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 4 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 6, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 7, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

CQE-RF-00705
Dimensions: 5"L x 5"W x 16"H (10" +4" to Change Filter)  - Weight: 6 lbs

• In stage 1, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stage 2, water travel through FLUORIDE REMOVAL resin. Containing synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 2700 ppm Fluoride (Avg. 600 to 900 Gallons). (if present in the water) As high as 6600 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed. (if present in the water)
• In stage 4, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.
• In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.
• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.